%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%% Mathematica Moravica document template %%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass[b5cutpaper, twoside, 11pt, leqno]{moravica}
\usepackage{amsmath}
\usepackage{amsthm}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage[left=1.95cm, top=1.75cm, bottom=1.75cm, right=1.95cm, nofoot]{geometry}
\usepackage[T1]{fontenc}
\usepackage{gensymb}
% allow equation break from page to page
\allowdisplaybreaks
\usepackage{fancyhdr}
\pagestyle{fancy}
\fancyhead[RO,RE,LO,LE, CO, CE]{}
\fancyfoot{}
\fancyhead[RO]{\footnotesize{\thepage}}
\fancyhead[LE]{\footnotesize{\thepage}}
\fancyhead[CE]{\footnotesize\textsc{\rightmark}}
\fancyhead[CO]{\footnotesize\textsc{\leftmark}}
\fancyfoot{}
\renewcommand{\headrulewidth}{0.5pt}
\renewcommand{\footrulewidth}{0pt}
\footskip=0cm
\headheight=15pt
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%% Defining Length of the Address box%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newlength{\alength}
\setlength{\alength}{10cm}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%% Mathematica Moravica Logo %%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\volinfo{\textsc{Vol.} \textbf{\currentvolume}, No. \textbf{\currentissue}}
\def\publname{Mathematica Moravica}
\def\copyrightyear{2018}
\def\copyrightholder{Mathematica Moravica}
\def\currentvolume{22}
\def\currentmonth{}
\def\currentyear{2018}
\def\currentissue{1}
\pagespan{1}{12}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%Here authors can define environments and their numbering schemes.
%Authors should add environments that are to be used in the paper
\newtheorem{theorem}{Theorem}[section]
\newtheorem{proposition}{Proposition}[section]
\newtheorem{corollary}{Corollary}[section]
\newtheorem{lemma}{Lemma}[section]
\theoremstyle{definition}
\newtheorem{definition}{Definition}[section]
\newtheorem{remark}{Remark}[section]
\newtheorem{example}{Example}[section]
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%Authors can also define custom functions or macros to make typing of frequently used complicated expressions easier.
%
%\newcommand\dd{\mathbf{d}} %to be used ONLY within math environment.
%\newcommand\im{\mathrm{Im}} %Imaginary part using ordinary upright font
%\DeclareMathOperator{\real}{\mathrm{Re}}
%
%Another way to achieve the result similar to the previous case,
%but this one looks more natural when typeset (because of small space after it).
%One can define more complicated functions, as for example
%
%\newcommand{\binsq}[2]{\displaystyle{\genfrac{[}{]}{0pt}{}{#1}{#2}}}
%
%which looks like binary operator, but with square brackets instead of ordinary ones
\begin{document}
\long\def\symbolfootnote[#1]#2{\begingroup%
\def\thefootnote{\fnsymbol{footnote}}\footnote[#1]{#2}\endgroup}
%and use \symbolfootnote[1]{footnote} to get an *
%and use \symbolfootnote[0]{footnote} to get footnote without any symbol
%and use \symbolfootnote[2]{footnote} to get a dagger
%and use \symbolfootnote[3]{footnote} to get a double dagger
\title[Here goes short title intended for headers if full title is too long]
{Here goes the Title of the paper. One can use line breaks \\
to get a more natura look of the Title}
\author[Short names, if too many authors to fit in the header]{Author's Name$^{\ast}$}
%\ast is used as a reference sign for some information related to the paper,
%which will be put in the footnote of the first page (like research support information).
%If no such information is provided, \ast command can be removed.
\address{Faculty of Technical Sciences, \newline
Svetog Save 65, \newline
32000 \v{C}a\v{c}ak \newline
Serbia}
\email{mmoravica@gmail.rs}
%If there are more than one author, \author, \adress and \email commands should be repeated here with
%appropriate information
\date{}
\subjclass[2000]{The form is: Primary: 40B05; Secondary: 33E99}
\keywords{keywords should be put here}
\begin{abstract}
Here goes a short abstract of the paper.
\end{abstract}
\maketitle
\section{Introduction}
\symbolfootnote[0]{$^\ast$Here goes some paper related information, like Research support etc.}
%if there are no such information, this command can be removed or commented out.
Here goes a short introduction. Displayed equations should be typeset using \texttt{equation} environment if numbered:
\begin{equation}
\zeta _k (x) \equiv Li_k (x) \equiv \sum\limits_{r = 1}^\infty
\frac{x^r}{r^k} \quad (k \ge 0)
\end{equation}
\begin{verbatim}
\begin{equation}
\zeta _k (x) \equiv Li_k (x) \equiv \sum\limits_{r = 1}^\infty
\frac{x^r}{r^k} \quad (k \ge 0)
\end{equation}
\end{verbatim}
Non-numbered displayed equations can be typeset using $\backslash [$ and $\backslash ]$:
\[
\Gamma = \int_{0}^{1}(-\log t)^{x-1}\dd t\equiv \int_{0}^{\infty}t^{x-1}e^{-t}\dd t
\]
Theorem-like environment should be defined in the preamble of the
document (just before $\backslash$\texttt{begin\{document\}} command).
Authors can choose the numbering scheme (section numbering, or document numbering,
e.g. Lemma 1, Lemma 2... or Lemma 1.1, Lemma 1.2 etc.).
\begin{lemma}
Text of the lemma.
\end{lemma}
Proofs should be typeset inside \texttt{proof} environment
\begin{proof}
Proof goes here.
\end{proof}
Multiline displayed equations should be typeset using \texttt{align} environment:
\begin{align}
x_{1} + 3 x_{2} &= a \\
2 x_{1} - x_{2} &= b
\end{align}
If equations aren't numbered, starred version of \texttt{align} environment should be used:
\begin{align*}
x_{1} + 3 x_{2} &= a \\
2 x_{1} - x_{2} &= b
\end{align*}
However, to achieve more logical structure of equations, one can fiddle with more complicated solutions:
\begin{align*}
\phantom{2}x_{1} + 37 x_{2} &= a \\
2x_{1} - \phantom{37}x_{2} &= b
\end{align*}
%References should be typeset within thebibliography environment
\begin{thebibliography}{99} % use two-digit argument if there are 10 or more references, one-digit otherwise
\setlength{\itemsep}{6pt}
\bibitem{1} Author 1, \textit{Title 1}, Vol. x., Publisher 1, Year 1.
\bibitem{2} Author 2, Author 3, Author, 4, \textit{Title 2}, Journal name, Vol. \textbf{n}, No. \textbf{n} (Year) , pp. n1--n2.
\bibitem{3} Author 5, Author 6, \textit{Title 3}, Proceedings of the Conference\ldots, place, date, pp. n1--n2.
\end{thebibliography}
\end{document}